QSFP+ 40GBASE-LR4L 1310nm 2km DOM Duplex LC SMF Optical Transceiver Module For Ethernet and Data Center

Description

Gigaopto’s GTQ-L13A4-02DC QSFP LR4 Lite transceiver is a module designed for 2km optical communication applications. The design is compliant to 40GBASE-LR4 of the IEEE P802.3ba standard.

The module converts 4 inputs channels of 10.3125Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically demultiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.

The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.

The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.

Specification

Features

• 40Gbps CWDM 2km QSFP+ Optical Transceiver
• Transmission data rate up to 10.3Gbps per channel
• QSFP+ MSA compliant, Compliant to IEEE 802.3ba specification for 40GBASE-LR4 links
• CWDM un-cooled DFB lasers, using ITU G.694.2 wavelength grid at 1270, 1290, 1310 and 1330nm
• High Sensitivity PIN-TIA with optical DEMUX
• Up to 2km reach over standard single mode fiber
• Compliant with QDR/DDR Infiniband data rates
• Hot pluggable electrical interface
• Lower power consumption <3.5W
• Operating case temperature 0°C to +70°C
• 3.3V power supply
• RoHS 6 compliant(lead free)

Application

• 40GBASE-LR4 40G Ethernet links
• Infiniband QDR and DDR interconnects
• Client-side 40G Telecom connections

Standard

• QSFP+ MSA
• IEEE P802.3ba 40GBASE-LR4
• ROHS Compliant

Electrical Specifications

Optical Characteristics

Note:

1. Even if the TDP < 1 dB, the OMA min must exceed the minimum value specified here.

2. See Figure 2 below.

3. The receiver shall be able to tolerate, without damage, continuous exposure to a modulated optical input signal having this power level on one lane. The receiver does not have to operate correctly at this input power.

4. Measured with conformance test signal at receiver input for BER = 1x10^-12.

5. Vertical eye closure penalty and stressed eye jitter are test conditions for measuring stressed receiver sensitivity. They are not characteristics of the receiver.

Compatibility

Gigaopto's optical transceivers are 100% compatible with all major switch brands and will not cause damage to OEM devices.

In order to ensure the quality and compatibility of our products, each product is carefully tested on the corresponding equipment before delivery to customers.

For this GTQ-L13A4-02DC compatibility, please refer to the P/N correspondence table. If the brand and part number you are looking for is not listed below, please let us know and we will be delighted to provide you with more details.

Package Dimensions

The module is designed to be complaint with QSFP+ MSA specification. Package dimensions are specified in SFF-8436.

For More of our QSFP+ 40GBASE Transceiver Series, please refer to the following form

Shenzhen Gigaopto Technology Co., Ltd., established in 2014, is a high-tech enterprise specializing in research & development, production and sales of optical transceiver modules and providing optical transmission solutions. We can provide optical transceivers from 155Mbps to 100Gbps, covering PON, SFP, SFP+, SFP28, QSFP+, QSFP28, CFP/CFP2/CFP4, FC, Video SFP, 1x9，XFP, x2, Xenpak, SFF optical transceiver series, as well as Active Optical Cable, Direct Attach Cable, OSA and so on. Our products are widely used in Datacom, Telecom, FTTx, Data Center, Security Monitoring and other fields. Our product sales cover Asia, Southeast Asia, Europe and America and other countries and regions.

Gigaopto's product quality relies on strong research & development capabilities, strict quality control procedures and rich production experience. We adopt a process-based production management system, and most of the optical module series from components to finished products use automatic debugging and testing systems. Our professional and experienced R&D team has independently developed various types of optical communication modules and owns a number of utility model patents and computer software copyrights. To date, with our reliable products and professional attitude, we have gained a good reputation in the industry, and have established mutually beneficial cooperation with many domestic and foreign customers.

Our company always adheres to the spirit of "quality first, customer-oriented", follow the market development trend, constantly optimize product design, improve service system, so as to provide customers with cost-effective products and solutions, professional customized services to meet the needs of our customers.